plp banner

Showing 13 products

Sort By:
Product per page
IP68
  • IP68 Environmental Protection: All “wet” components (connectors and end caps) are rated to IP68, providing total protection against dust and high‑pressure water jets or temporary submersion.
  • UV‑Stabilized Materials: Built from high‑grade, flame‑retardant (UL94‑V0) polymers engineered to endure decades of direct sunlight and extreme temperature fluctuations.
  • High‑Current Handling: The 10AWG (6mm²) cabling and connectors support up to 32A of continuous AC current, enabling more microinverters per branch.
  • Error‑Proof “Click” Locking: Connectors incorporate a tactile and audible “click” to confirm a secure, watertight electrical connection.
  • Non‑Destructive Maintenance: A specialized Disconnect Tool allows servicing or system expansion without cutting wires or compromising connector seal integrity.
  • Pre-Terminated for CQ16 Battery Stacks
  • One Pack per Stack
  • Series Interconnect Cables
  • For Fox ESS H3 Plus C&I Systems
  • Required Base for CQ16 Battery Stacks
  • One Base per Stack (up to 4 modules)
  • Floor-Mount Foundation
  • For Fox ESS H3 Plus C&I Systems
  • Designed for Fox EVO AIO (113 kg)
  • Aids Wall-Mount Installation
  • Protects Glossy Front Panel
  • Reduces Manual Handling Risk
  • Compatible with all EVO10 variants
IP65 Single Phase
  • Seamless Auto-Switching: Automatically transitions from grid-tied to backup mode in under 20ms—so fast your clocks won't reset.
  • 100A Throughput: Heavy-duty internal contactors can handle the full load of a large single-phase home.
  • Built-in RS485 Meter: Includes internal metering to simplify wiring and reduce the number of components in your utility room.
  • Rugged Metal Enclosure: High-strength IP65 casing protects internal switching logic from environmental stress.
  • Essential Load Management: Facilitates the safe isolation of the grid, preventing dangerous back-feeding while the battery is active.
IP65
  • Plug-and-Play USB/Serial: Requires no tools; simply plug into the inverter's bottom port and secure the threaded nut.
  • IP65 Weatherproof: Fully sealed housing allows for installation on outdoor-mounted inverters.
  • Automatic Reconnection: Smart firmware automatically reconnects to the network after power or signal loss.
  • 24/7 Remote Monitoring: Provides data intervals as low as 5 minutes to the FoxCloud for granular analysis.
  • Universal Range Compatibility: One dongle type generally fits the entire S, F, T, and H series (check specific model for H3 Pro).
IP65
  • Plug-and-Play USB/Serial: Requires no tools; simply plug into the inverter's bottom port and secure the threaded nut.
  • IP65 Weatherproof: Fully sealed housing allows for installation on outdoor-mounted inverters.
  • Automatic Reconnection: Smart firmware automatically reconnects to the network after power or signal loss.
  • 24/7 Remote Monitoring: Provides data intervals as low as 5 minutes to the FoxCloud for granular analysis.
  • Universal Range Compatibility: One dongle type generally fits the entire S, F, T, and H series (check specific model for H3 Pro).
IP65
  • Plug-and-Play USB/Serial: Requires no tools; simply plug into the inverter's bottom port and secure the threaded nut.
  • IP65 Weatherproof: Fully sealed housing allows for installation on outdoor-mounted inverters.
  • Automatic Reconnection: Smart firmware automatically reconnects to the network after power or signal loss.
  • 24/7 Remote Monitoring: Provides data intervals as low as 5 minutes to the FoxCloud for granular analysis.
  • Universal Range Compatibility: One dongle type generally fits the entire S, F, T, and H series (check specific model for H3 Pro).
IP65
  • Plug-and-Play USB/Serial: Requires no tools; simply plug into the inverter's bottom port and secure the threaded nut.
  • IP65 Weatherproof: Fully sealed housing allows for installation on outdoor-mounted inverters.
  • Automatic Reconnection: Smart firmware automatically reconnects to the network after power or signal loss.
  • 24/7 Remote Monitoring: Provides data intervals as low as 5 minutes to the FoxCloud for granular analysis.
  • Universal Range Compatibility: One dongle type generally fits the entire S, F, T, and H series (check specific model for H3 Pro).
IP20 Single Phase
  • Centralized Ecosystem Hub: Acts as a master controller that aggregates data from multiple meters and inverters, creating a unified communication point for the FoxCloud.
  • Enhanced Signal Range: Features an external high-gain antenna that significantly outperforms standard internal WiFi modules, ideal for inverters located in basements or garages.
  • Smart Linkage Logic: Enables "IF-THEN" automation (e.g., "If solar surplus > 2kW, then trigger EV charger"), turning a basic solar setup into a true smart home.
  • Diverse Connectivity: Supports multiple uplink paths, including Wi-Fi and Ethernet (LAN), ensuring your system stays online even if one internet connection fails.
  • Easy DIN-Rail Integration: Designed to sit perfectly alongside Chint meters in the consumer unit, keeping the installation clean and professional.
  • Non-Intrusive Installation: The split-core design allows the clamp to be snapped around the main live cable without disconnecting any existing wires, significantly reducing installation time and risk.
  • Instant Export Limitation: Provides real-time data to the inverter to enable "Zero-Export" mode, ensuring compliance with local grid regulations (like G100 in the UK) by preventing unauthorized feed-in.
  • Universal Fox Compatibility: A single SKU that works across the entire Fox ESS range, including the S, F, H1, H3, and AC series, simplifying stock for installers.
  • Directional Accuracy: Features a clear orientation arrow to ensure correct installation, preventing the common "negative consumption" errors found in generic sensors.
  • Long-Range Signal Stability: Ships with a high-quality 10m shielded cable (extendable up to 30m with twisted pair) to ensure data integrity even in electrically noisy environments.
IP20 Three Phase
  • MID Certified Accuracy: High-precision Class 1.0 measurement ensures billing-grade accuracy for monitoring import/export.
  • Bi-Directional Tracking: Simultaneously tracks solar generation, home consumption, and grid interaction in real-time.
  • DIN-Rail Ready: Compact modular design fits perfectly into standard consumer units without specialized mounting.
  • Modbus-RTU Integration: Native RS485 communication allows for instant response times in export limitation.
  • Backlit LCD Interface: Clear, local display of voltage, current, and power factor for on-site troubleshooting.
IP20 Single Phase
  • MID Certified Accuracy: High-precision Class 1.0 measurement ensures billing-grade accuracy for monitoring import/export.
  • Bi-Directional Tracking: Simultaneously tracks solar generation, home consumption, and grid interaction in real-time.
  • DIN-Rail Ready: Compact modular design fits perfectly into standard consumer units without specialized mounting.
  • Modbus-RTU Integration: Native RS485 communication allows for instant response times in export limitation.
  • Backlit LCD Interface: Clear, local display of voltage, current, and power factor for on-site troubleshooting.

Showing 13 products

Sort By:
Product per page
Shipping Across UK
10-Year Warranty
Built for the long run
30-Day Returns
Hassle-free
Expert Support
From energy specialists